Search results

1071287 Hey Tug, did you lower your transfer case yet? When I lifted my Jeep, I had to lower the transfer case to eliminate vibration from the rear driveshaft, cause the angle was too steep. Anyway, looking forward to a few pics of your lift, and glad to see you got it done. I had to do mine...

1071596 The vibrations after a lift come from the rear drive shaft being at too high an angle coming out of the transfer case. to solve the problem, I had to lower the trans mount/skid plate a half inch. My lift is just stock springs with a 2" econo lift. The econo lift consists of 4...

1071637 No need for the axle shims, since they were stock springs. All the econo lift did for me was give my Jeep a better stance. Since it's a CJ5, I really don't wanna go any higher. And, yes, I kept the same driveshaft. As stated before, all I had to do was lower the skid plate a little...

1071642 What's the matter, are the rest of you people too ugly to show yourselves? :lol: :-D :-P edited by: Glass79CJ5dude, Jun 16, 2003 - 05:04 PM[addsig]

1071816 far_right, the springs were widened on the newer 5's, so to answer your question, no, sorry they won't fit. Wish they would, cause I'd be interested. Hey jhiggins, how much for the intake and carb, and is the intake cast iron or aluminum?[addsig]

1071970 On a sealed U-joint with no grease fitting, it does not matter which way it goes in. :-) [addsig]

1071983 A friend of mine just had a similar problem with his. They are relativly easy to replace, however, sometimes the mounting bolts can get corroded in the aluminum throttle body, and can break off. One thing you can try is to tap on the head of the bolts before loosening them. That...

1071987 A three and a half inch Rubicon Express lift will look good, and I think 35's will fit that lift. Also, don't forget, you may have to lower the center skidplate/transmission mount, due to the vibration you will get from having the driveshaft at too high an angle. The Rubicon Express...

1072010 Anyone seen, heard, or have a winch that needs some TLC?[addsig]

1072087 Nice Job Tug. It feels good when you do something like that on your own, and then have the end product to look at and be proud of yourself for acomplishing something you thought would be harder than it really was.[addsig]

1072141 AW Man :-( I was looking for an aluminum intake. I just got rid of a big old cast iron one.[addsig]

1072344 e-mail me the link, and I'll post it. WSRCAR@aol.com[addsig]

1072349 Yes you do. The picture has to be on the internet first.[addsig]

1072350 Nope, need the link where the pics are on the internet.[addsig]

1072522 Hey Copper, I'm guessing that by now your Jeep has told you what it wants. ::hint:: (lift) ::hint:: :-D [addsig]

1072523 Welcome to the wonderful world of Jeepz.com. Here you will find lots of knowlegable Jeepers who will help in anyway they can. Now, as for any "cheap" modifications or upgrades, I'll leave you with just four words: J ust E mpty E very P ocket :-D [addsig]

1072524 Hey Mike, if you don't have any luck finding parts, just send me the busted winch, cause I'm looking for a winch in any condition. :-D [addsig]

1072525 You have been de-classified far_right. edited by: Glass79CJ5dude, Jun 21, 2003 - 03:50 PM[addsig]

1072527 Here is where you can order stickers from Pfunk from Q-tec message board. Clicky Clicky edited by: Glass79CJ5dude, Jun 21, 2003 - 04:26 PM[addsig]

1072563 What surplus store!!! I want one too!!!![addsig]