Search results

I am in the middle of building me a motor dont laugh but so far I have a 2.5 lt bored over 30 and am about halfway done with a major port job on my head, I would have never guessed there is about a 1/2 of extra metel on the intake ports that you can get rid of just to make it flush with the...

has anyone installed one of these in there jeep if so how much of a pain in the a$$ was it they say about 2 hours with common hand tools and is for experenced home mechs. I consider my self experenced but my patience is poor I am the type of person that will grab a hammer and make it fit. and...

well finally finished my lift after 2 weeks a couple of phone calls to 4 wheel drive hardware and ups, and now I am going to replace whats left of the 1991 tie rods has anyone fliped them meaning putting the ontop of the steering knuckles instead of underneath, I am going to buy the entire...

Has anyone with a 4 banger yj ever put tj motor mounts on their jeep, I am looking for some for urathane ones that are stiffer than the rubber ones I have now, but I can only find them for 97 and newer so I was woundering if it woud work or is it way off, kinda sucks they dont make them for the...

If anyone live in the hampton roads Va area I am looking for some folks to wheel and a place to wheel as it is current I have to drive about an hour away to have fun so its kind of a damper and no one ever wants to go i also go down to outerbanks and do a little beach driving so let me know. Marc

I just put a 4in lift on my yj, and I am a running into a whole lot of head aches and bloody knuckles, I have a Jks teloscopping trac in the front so its not a huge prob, since I didnt buy the kit just the springs trying to save a buck (bad mistake) now my rear track bar is about an 1 1/2 to...

I went ahead and bought an 89 yj for parts today and it has some real nice stuff and some real bad rust anyway it seems to have 2in. lift springs and skyjacker shocks, I dont know if it had skidplate spacers sice the transmission was held in with a strap only thing left of the skid is where the...

clutch hose to master cylinder is big $$$$$ I have got a yj hub bearing brand new, i bought it for a 91 but I am assumeing that it will fit any yj make me an offer I dont remember how much I payed but I think it was around 150.00 but not sure thanks Marc rooxter@msn.com I am located in...

I must start by saying wow its been a while since I have been on the site I remember having 3 stars and around 200 post and now I am back to the begining but I like what yall have done to the place real fancy, anyway Here is my question since I am finally back home for a while and have some...

got a brand new nation brand hub bearing in the box cost around 250.00 new and has a life time guarantee from autozone have receipt. let ke know rooxter@aol.com

1042154 Hello folks its been a while, and most of you prob dont remeber but about 3/4 months ago I installed a JKS telescoping trac bar on the front 91 yj well it helped but not enough to pay for its self ($200.) untill now I also recently purchased the JKS sway bar quick disconects, and I must...

1042254 I called my local dealer today to get my recall fixed for my e-brake, and they told me that there is a splash gard recall, catlitic converter recall, fuel desending unit recall, hope this helps some people also i dont know if it is limited to year or engine size mine is the 4 banger but...

1042255 Has anyone seen these in action or have them there kinda expinseve 186 and axle let me know thanks marc[addsig]

1042260 got a black hard top matching doors no broke windows hampton virgina area make me offer gotta get rid of it asap Marc [addsig]

1045823 Has anyone used that stuff? I have had a bad experence it seemed to make things worse instead of better now you would think I have a 2.5 ltr, powerstroke under my hood, my jeep was never real quiet but now it frigen loud, if anyone else has had that problem from one of there products...

1045827 Does anyone know where to get a reducer even smaller than the one that comes with the gauge so that I can screw it into my head, the one at the back of the block is real small compared to the one at the front of the block, but that one is for the computer sending unit not the gauge...

1045831 Can any body give me some info on some spacers I only want about and inch or so, do i have to change my lug direction to hold the spacer on or what , I like the wheels I have they are the cast wheels with the circle pater around them I think they are 15 x 8 or somthing like. is there...

1048479 I dont know if anyone here subscribes or picks up 4x4and sportutility but in the mag they offer sealed beam headlights for yj, tj, and i think cj, anyway i picked up a pair and i must say they are the best part of any lighting project they run around 80.00 for the street legal white or...

1049654 i curently have a 91 yj with the 4 banger in that i have spent alot of money on getting it where it is now, it has a 157,000 miles on it and has no major problems so far (Knock on wood), i bought all of the disconect stuff for the front end by jks and have done some engine work...

1050461 well i broke down and bought gave it a tune up and a can and a half of carb cleaner now it runs a lot better still wants to idle at 1500-2000 rpms but i want to run a couple gallons of good gas through it and some fuel system treatment before i start any major carb adjusting. That...