Search results

Im looking into replacing my Dana 30 in my 2001 TJ, however, the new dana 44 bolt ons from a number of different companies has gotten me thinking of just swapping out a more reliable axle. When I say upgrade the dana 30 I would pretty much only replace the axle shafts with chromoly ones because...

So on my way back from Wheelin and I noticed that my steering had about 3-4 inches of slop in it. After the getting home and waiting for the rain to subside I got under the jeep and had my significant other turn the steering wheel back and forth while I looked at all the components. I soon...

Hey quick question here as I think I know the answer. Will axle shafts for a 95 cherokee dana 30 fit in a dana 30 for a 2001 TJ? I think they will, but I would like to get some of your opinions.

Hey does anyone know if I can get a 4.0L motor and ax15 transmission out of a 97-Present Jeep Cherokee and put it in my 95 YJ? :shades: Trying to use a newer engine in my YJ, since I went 4wheelin this past weekend and didnt have the torque that i wanted. If this is possible, what all do i...

I have a 2.5L YJ, and I am going to do the 4.0L throttle body and the 19# fuel injectors modifications. First, I can get a 97 TJ 4.0L throttle body for cheap, so I was wondering will that work with the computer and will it fit on the intake manifold? Second, between which years are the 19#...

I have a set of what i think are aluminum, but I could be wrong. Anyways, they have some kind of rust or film on them. Does anyone know how to make them shine again. Thanks in advance,

I am moving to Columbia South Carolina, anyone know of any trails or other Jeepers that I can run with?

Is it just me or does the four door jeep make you loose your stomach? I cant seem to stand the sight of them let alone the fact that four sit in there comfortably. Tell me your thoughts and maybe I might wave at those horrid car they call a Jeep Wrangler.

Hey Guys, I just bought a hardtop for my YJ, and now I am looking on how to wire the defroster and wiper to two control switches. It seems that there is a plug coming out of the rear bottom left section of the hardtop I am guessing this is where the wiring starts. Does anyone know where I may...

I have recently installed a 2.5" BDS suspension, and when taking off the old rear leaf springs I noticed that my rear track bar was disconnected already. Upon further inspection, I found that the bracket that attaches the track bar to the axle broke. I then installed the new suspension and...

I have a problem with an oil leak near the back right on the passenger side of the engine near the starter. Since it was leaking oil near that area and down the dust pan of the transmission, I thought it might be the rear main seal. So, after pulling out everything and putting the new RMS and...

I recently bought an output seal for my TC, and I have my TC already out to replace it (had to do a rear main seal). The seal that the auto parts store sold me doesnt look close to the seal that is on it now. Well thinking that there maybe some reason they look different other than the reason...

For some strange reason I have oil burning from my 95 YJ. I cant seem to put a finger on what it is. I can smell it coming from the exhaust when ever I have the back window open. I recently added an Air Raid Intake and a 62mm throttle body spacer. Could this be the issue? Also, how do you...

For some reason my 4 wheel drive indicator light on the dashboard will not shut off. I have already checked where the vacuum plug goes into the transfer case, however, I did not check if the hoses were broken. Also, it engages into 4L and 4H as well as 2H, but the light persists to stay lit...

I have finnally found a motor, however, the motor is from a 92' YJ and was modified to a carburated engine. The question at hand is do I buy the engine and then find an ECU and EFI, or do I just find a full package deal with an engine and everything? I told the guy I would buy it this weekend...

I am looking to purchase a new engine for my YJ since the horsepower is not what I want. Any suggestions for a new motor? I have heard of getting a 4.3 liter V6 and also heard of getting a chevy 350, however, I dont want to have to replace the dana 35 and transfer case that is in there...

I recently bought a 2" suspension lift, however, I only installed the rear leaf-springs and shocks. Also, I lowered the transfer case. When I put everything back together I noticed, when I first started driving it, that I could not go into any of the lower gears. I dont mean lower as in 1st...

I recently bought a 2" suspension lift from BDS, and there are 2 questions that I have. The bolts that are running from my transfer case pan recently rusted and broke off, so what I had to do was drill a hole right through the frame where the old bolts were. Now the new lift comes with a...

I am purchasing a 4.0L and an AX15. I just want to know if it will fit in the same way as the 2.5 and the AX-5. Like are the engine mounts the same, can I use the same transfer case, is the dana 35 thats in there strong enough to handle the torque?

Is there anyway to convert an AX5 to an AX15 without changing the 2.5L engine. I am currently trying to convert the 2.5L to a 4.0L, and with the research that I have done, everyone says that I need to replace the AX5 to a AX15 to handle the torque. Since my AX5 transmission's synchro rings are...