Search results

  1. yjmudder90

    poly fuel tank questions

    first off, do 90 yj 4.2/ax-15 come with poly tanks??? second, can all poly tanks do the 20 gallon mod??
  2. yjmudder90

    no gauge lights!!!!

    i was at my girlfriends house tonight in the heep. since it is april I have the bikini top on and doors (since it was supposed to rain). we went out to eat and we were in her car. when we got back i hopped in the yj (after a heavy shower) and hit the lights..... well, I have head/tail lights and...
  3. yjmudder90

    brake lights are screwed!!!

    i just noticed that my brake lights only work when i brake hard. has anyone had any problems with this or has my jeep caught the gremlins???? any help is appreciated.
  4. yjmudder90

    1990 yj rear axle question

    i have searched for ages and cannot find what i am looking for... i have a 1990 yj with a 4.2 and 5 spd. transmission. my question is what rear axle do i have?? i know it is a dana 35 but is it a c-clip axle??? i know some of the early yj's have the non c-clips but does anyone know the years...
  5. yjmudder90

    coolant temp guage not working after body lift!!

    i installed my body lift and my new radiator, swaped to an electric fan setup, and now my coolant temp guage is not working:???: what could be going on?? could the sensor have come unplugged during the lift?? if so where is it located?? this body lift has been a major P.I.T.A. if you know what...
  6. yjmudder90

    help on body mount bolts!!!

    I am putting on a body lift and i stripped the 2 front bolts on the driver side and the passenger side rear is broken off inside the threads. how can i go about getting these out??? the front driver side bolt is stripped inside the body and the middle bolt is broken about 1.5" out. these are the...
  7. yjmudder90

    Am I doing it right???

    When i drive my Jeep i usually drive above 1000 rpm and below 2500 rpm. is this bad for my engine/gas mileage?? should i go higher??? it just sounds like it is revving way high above 2500 rpm. I get about 11 mpg with stock (3.07) gearing and 33" tires. I have heard of people revving to 3000 and...
  8. yjmudder90

    who makes these bumpers???

    does anyone know what company makes these bumpers?? they were on the jeep when i bought it and the owner didnt know either.
  9. yjmudder90

    32" on a budget

    I posted earlier and asked if my 32x12.50-15 baja claws would fit. the only reply i got was practically "absolutely not". well, they did so..... here is what i did. 2" longer shackles (6", added 1" of lift) 15"x7" wheels with 4" backspacing trimmed the 1.25" lip off of my flairs Everything fit...
  10. yjmudder90

    will it fit???

    I have a set of 33x12.50-15 M.T. baja claw tires laying around from my white 90 yj. the tread is slightly worn and actually reads around 31.75". my camo 90 yj has a 1" shackle lift. I want to put these tires on while i wait on my lift to get here (4"). will these fit or is the lift a...
  11. yjmudder90

    yj wheel question

    i just got a set of wheels for my yj for cheap. like "free" cheap. my only problem is that they have a 4" backspacing on a 15x7 and i will be running a set of 33x12.50-15 Mickey Thompson Baja Claws. will it be worth it to use a 1/4 inch wheel spacer to make my offset 3.75" on stock studs or...
  12. yjmudder90

    hard top options

    i hate taking off my hard top.it is too much of a p.i.t.a. Is there anything i can do to make this easier like cut the top in half and put hinges on it so it can fold back. I want to be able to take it off myself but need something i can do for cheap until I get my soft top.
  13. yjmudder90

    REAL tire question!!!

    Aside from the added lift, what real advantages do 35" tires have over 33" tires?? I am planning on buying 33" but have the room and flex for 35". what will running a 33" tire make me lose???
  14. yjmudder90

    project herculiner

    i am planning on doing my herculiner sometime this week. my question is has anyone sprayed it on?? are there any advantages to this?? I have a spray gun and a compressor with a water filter. are there any advantages to rolling it vs spraying it and vice versa???
  15. yjmudder90

    Abs

    i have the connections for the abs system but they were disconected when i bought the jeep about 2 months ago. i have read that a lot of people diconnect it anyway but why???? my yj is a daily driver and the brakes work fine, is there any reason to leave it unhooked or should i plug it back up??
  16. yjmudder90

    how bad would this hurt my gas mileage?

    i am thinking about locking my 4wd actuator or putting in 1 piece shafts. how bad would this hurt my gas mileage? also, how would i go about locking it and getting rid of those crappy vaccume lines? i was thinking about the hose clamp method. any input would be helpful.
  17. yjmudder90

    stock height

    how high is a stock yj from the ground to the bottom of the frame??? I have 2 1/2" shackles but want to know how much my springs have sagged. also, how big of a tire could i run on this small of a lift?? I have stock wheels from a later model jeep. if someone could tell me how to post pics...
  18. yjmudder90

    swap or not???

    I have a 5.7l 350 from my 99 tahoe that i am rebuilding right now. should i swap out my old 4.2l with ax-15 for the 350 or not??? if so, what all do i need to buy/do to make it work???
  19. yjmudder90

    power steering...

    on the way home tonight i stopped at the gas station to get some orange juice. when i left i noticed a large gathering of water beside the store so i decided why not just drive through it. it was probably about 50 feet by 50 feet by 2 feet deep in the center. about half way through it i had to...
  20. yjmudder90

    honest opinion

    i am thinking about getting tube fenders for my 90 yj. what do you guys think about them?? are they retarded or should i spend the money on them?? should i just remove my flairs for the extra room or should i go with the tubes? if anyone has an opinion with pics it would help greatly, thanks...
Back
Top