Search results

Hi All - I used to come on here all the time and really appreciate all the help over the years. Over the past 2 years I have started boating and launch the boat using my jeep (95 YJ) into the Intercoastal (salt water of course) - I always hose off the brakes, axle, everything very thoroughly...

Anyone else have a Jet Ski? I just picked up a 95 Sea Doo SPi for cheap, it only needs a starter and we are rebuilding the factory one. Should have it in the water in a week or so to try it out. I have been wanting one for quite a while and are building a house in a water access community (has...

RE: 2 Day Mounds Run!!! So my horn wasnt working and I couldnt figure out the problem and needed an inspection - it was already a month overdue. So....I bought a $3 momentary toggle and ran it to my battery and the horn bypassing any relays or fuses. I dont use the horn - at least not very...

Taking my Jeep to get the state inspection done and just looking over things my Horn wont work. All the connections are good and I took off the steering wheel center cover and buffed the rust off the plates and still nothing. Checked the connection at the horn and all is ok and checked all the...

I was at SAMS CLUB today and they had a Champion winch - 7500lbs. 2.2 HP permanent magnet motor, 95ft of 5/16 line with rolller fairlead, 12ft remote, and mount plate. List price is 298.00!! Does anyone know anything about these winches - only has a 1 year limited warranty but still at that price.

I need to to change my transmission fluid in my 95YJ - read that this Pennzoil syncromesh is the stuff to get. 2 Question: Where can I find it? and.... Where exactly is the drain plug and fill plug for the transmission. - AX 15? Whatever the stock one is for the 95YJ. I really need to get...

Transmissions Just got back a little while ago taking my YJ out on its first mud run since getting the new tires. They performed great with no problems. Iwas about to take off when I saw an XJ stuck in mud up to its axles. Its been raining 30 out of the last 35 days here. Got out and took...

After some looking for some 33's, My buddy at Sears hooked me up with some General All-Terrain 33x12.50x15's - set of 4 installed for 474.00 (92 per tire) out the door with a 50k mile warranty. Very aggressive for an all-terrain, similiar to the BFG A/T. I'll post some pics tomorrow. Going to...

I finally sold my chrome wheels and 31's today - I already have my black rockcrawler 15x8 wheels and need some 33's. I had to drive home with 5 inches of lift and 235's. It was quite embarrassing. Went to a local tire shop today and the guy tried to sell me some 33x12.50x15 AT - Winston...

Well I bought my 31's last year and of course I am now looking at 33's, the 31's are now for sale. The wheels are pacer chrome wheels (15x8) with centercaps and locking lugs, the tires are Liberator All Terrain 31x10.5x15 - they were both purchased last year and have less than 3k miles on them...

OK, I have been gone from the board for several months due to the wife and I looking for a new house but thats over now, weve finally decided on one and were actually staying together :wink: Anyways, I have been saving for my 33's and I am almost have enough to purchase them. My dilemma is...

So I bought my stock 95 Wrangler 2.5 last year in July for $3500. I have been working on it ever since and have kept a log of all the mods and work I have done to it along with the reciepts and invoices. Well I finally got the ba!!$ to add it all up today and Im sitting at $3100. And I'm not...

OK, OK, I found this on another forum I admit it but what a great picture. Get to the trail in comfort and then get out the REAL 4wd!! Its not a YJ but thats OK :wink:

Well I got the front diff welded and the on-road performance is fine. I put her in 4 low and switched my posi-lock (home-made) and both frt wheels are definitely locked. Now I went to unlock my passenger side axle and nothing! :evil: It didnt want to release - had to disconnect the cable from...

Had to finally cut my grass for the first time this year. I am so grateful for riding lawnmowers. Been thinking about putting a lift on it and some 18 M/T's!!! :lol:

I have installed the flexalite electric cooling fan in my 95 YJ. In doing so the factory shroud was removed, the engine splash shield was attached to this. Once removed there is no good place to reattach it to. Currently I have it zip tied to the front trac bar. Do I need this shield? Seems...

I am looking into having my front D30 welded (lincoln locker). Does anyone know of any links that detail this procedure? Also, what kinds of places will do this and what can I expect to pay? Seems like there might be some liability issues with the shop. Thanks in advance.

Pics... FINALLY I located this link for a writeup on the Front Axle Disconnect. Anyone used this write up or know if this pertains to a YJ? Looks like he has coils. If anyone has any other writeups I would like to compare. Seems really simple to do. Thanks...

OK, I have taken off the shroud, clutch and blade (trying to prepare for install) - now I am down to the water pump pulley - It has four bolts sticking out of it. What do I do with those? Just reuse the same nuts and tighten them up or do I have to take off the pulley and do something else...

Well I have some money (about $650)that I can spend on my Jeep and I cant figure out what to do with it. I have narrowed it down to 3 options: 1) Bestop Supertop 2) Set of 5 33's M/T (unknown brand) - currently running 31's with less than 2k miles on them or 3) Flex-a-lite Electric...