Search results

This is driving me crazy. The jeep is a 96 cherokee sport with the 4.0 H.O. she just turned 150K the other weekend. I have recently replaced the plugs, wires, cap, rotor, TPS, front O2S, looked at the back and its fine, hi-flo cat within 6 months, cps when the timing gear spun 180*, along with...

Humor for a Monday I ordered one of the ebay "hi-flow" cats and onthe package it says it is for the 5.2L grand. jstu wondering if this will still work out? also will this bullet shaped cat (straight pipe LOL) increase the noise of the exhaust considerably or will it just lower the tone of my...

broken transmission casing my jeep is in the shop right now cause the timing chain slipped 180* out of time. I got that replaced and couldnt get her to spark. so we got her towed down to the auto shop and they are saying that the crank positoin sensor will cuase the coil to recieve low to no...

I have heard of this being performed after certain changes have been made to the vehicle and sometimes yeilds positive results. does anyone know how to reset the ecu on a 96' xj sport to default settings?

RE: homeschooling I just went out today and took some measurements, and am ready to buy some shims and a extension of the yoke to get rid of MY vibes. found out they are being cause by the stock yoke being too short and the driveshaft about to fall off the splines!! (yes she is down for the...

RE: Bad front axle U-joints? Help! i have yet to get onthe ebrake cables and brake lines. stockers are holding up for on road pourposes so far.

RE: transmission tidbits please tell me there is another solution to this problem and not having to dorp 500 on a new driveshaft!! ok after the 1.5 addition to the rear, when I take my foot off the accelorator, I am hearing a disengaging type sound that seems to be comming from the transfer...

ok damnit!! LOL I got the 1.5" shackels on and had to take the old e brake cables off because they are now too short!! LOL not hte cables but the housings!! LOL what can i use to get back an ebrake? I am sure there is another vehicle in the parts store that will do the trick but umm which one?

RE: Fuel system... well I finally got around to calling Russtys and finding out that their oturageous shipping charges were due to their website messing up. so shipping wasnt anywhere near what it had predicted!! I went ahead and ordered most of what i need form them 1.5" rear shackels the XJ...

Side brackets for a fold and tumble rear seat YJ or CJ... I cant believe they added like $20 to the shipping prices for a set of bump stops. both front and rears but still. that is just outrageous. even $50 for the performance package seems a little high to me, but id be willing to buy just...

ok I am prolly going to need something to help the rear drive shaft out when i put on the 1.5" rear shackles to level out the already 5.5" lift on the front. I have been looking for something a little cheaper than the SYE kit with a new drive shaft, while that might be the best route to go, I...

ok i have made up my mind and am going to go through with 33X12.5 on a true 5.5" lift. now gearing comes in to play with bigger heavier tires. I have a 96' auto with the 4.0 H.O. and the towing package. but dont know what gearing is in there. right now i am runing 30X9.5" bfg.s on 15X8 cragar...

RE: East Chaicago to Elkheart and back! I know this is going to take me a little while to get the cash for all that parts that are going to be required, but it is always best to know everything you are going to need before hand. Blueprinting!! First off a little about the vehicle in question...

rimz are cragar 397 with 4.75" bs mounted on 30X9.5 bfg A/T 5.5" lift in front and 4.5" in rear.

quadratek messed up my order and i ended up with these. I dont have any use for them but thought maybe someone on here is looking for a little better deal then the retailers are giving out. they are 15X7 cragar 342 with a 5 on 4.5 bolt pattern and 4.25" BS. hows $110+ shipping sound to ya...

I fired akasha up this morning and take off and get half way down the drive and i smell something burning. description of that smell. kinda like a sweeter propane smell, or a sweet oil burning smell. I did have the heater on high, but this isnt the first time it has been on as of lateley...

I currently have a set of the bfg A/T KO's 30X9.5 and am wanting to go ahead and put on some rims, but I am not sure if I can put a set of 15X8's on those tires and be ok with them. so what do you guys think? also how would the 3.75" backspacing affect the stuffing of the tirez? will the tires...

ok im sure you guyz know what i got under there but if you dont a little refresher. rough country 4.5" , and as it stands now there is 5.5" of lift in front and 4.5" in the rear. I am going to be loking at picking up a pair of the jks quick discos and am a little leary about the front brake...

after my last ordeal with my rotors I am going to start saving up for some high performance rotors and calipers. just wondering if anyone knew where or if there are any parts out like this? I am also thinking about doing a rear drum-disc conversion if there is such a thing for the cherokees/...

High speed video I have heard that it dosent really do much for the cherokee on road and off. what is up with this? I come from a hot rod background origionaly and this is a vital part of rear traction!! why is it that most cherokee enthusits insist that it dosent do "anything" for the vehicle?