Search results

I have a 2013 jku rubicon. Has a 4 in lift all after marlet control arms, driveshafts, track bars etc. After putting lift tires and regearing my jeep my camshaft sensors come on after traveling on the highway for any length of time. The quickest it's come on was about 15 minutes traveling 70...

Ok so here's the deal. I have an 87 yj I'm fixing up. It has a spring over kit so I had to also get the high steer kit. Now, herein lies the problem. My track bar mount fits but my drag link and track bar make contact. Is there a way to avoid that without eliminating the track bar? I haven't...

Any body know if a steering box brace would be able to be mounted with the teraflex high steer kit and frame brace? Need something to stop of play on the box. But not sure of it were fit with the tack bar and frame brace bracket. Sent from my SAMSUNG-SM-G891A using Tapatalk

Ok so I bought double cardon Adams driveshafts. It says that at the axle it should be straight on. When I try adjusting my control arms to do that everything is thrown way out. My rear coils look like they are about to blow out from the jeep. My front coils when I tried bent into the sway bars...

Ok so I know some people are probably sock of my questions considering they are all based off the same thing. As I fix one thing something else arises. It's bugging me too. So now I replaced all the ball joints. The lowers on both sides were way gone. Now that the shimmy is gone there is a...

I need to cut down on clutter in my trunk but carry my recovery bags all the time bc you just never know. Haha. What are the main items needed to have in the recovery bag? I have axle chains a couple short lengths of chain a 3 tow straps jumper cables winch cable gloves rear hitch shackle snatch...

Does anyone else have a problem with their ebrake? My 07 was the same way. Even had it tightened and still doesn't have any hold when fully pulled. Doesn't even feel like it is pinching. Any ideas? Sent from my SAMSUNG-SM-G891A using Tapatalk

So I'm confused. I bought an 87 YJ from a guy in new Hampshire and it has a cable going from under the dash to where the vacuum pump for the 4wd is located. The knob to pull says PTO. Something tells me this jeep doesn't have a power take off lol. I'm changing axles on it and had to remove that...

Anyone know if this batt tray can mount optima? Or what kind of battery is best for this tray? I bought it off someone and can't seem to find, no matter where I look, the kind of battery to use for it. Sent from my SAMSUNG-SM-G891A using Tapatalk

Looking at big brake kits and I can't find a teraflex rear kit that comes with calipers and pads. Other than teraflex is there any kits that anyone has and would recommend to a fellow jeeper? Looking for my 2013 rubicon with 4 in lift 35 x12.50 toyo open country R/Ts and eventually my...

Ok so I know I've posted a million times on here for different problems. I have a a 2013 jku rubi with a 4 in lift rough country, teraflex adjustable track bars and teraflex alpine control arms a superlift steering stabilizer and Adams 1350 driveshaft front and rear. Every time I get an...

When turning my steering wheel in motion or not there is a lot of crackling and popping. I've gone under when someone turns the wheel and don't see anything. Seems like it's coming from above anything I can see. I have put a high steer kit which came with a new drag link and tie rod nothing is...

So I lifted my jeep have 35s and upgraded gears to 4.88. Since I got everything straight I keep getting a code when going highway speeds for about 20-30 minutes. It comes up as camshaft pos sensor bank B and another one saying torque request denied. Anyone know of any other people having this...

So I called teraflex to order control arms and they recommended the alpines. Anyone from the north where the roads get salted know how they fair in the winter? I'm from Massachusetts so lots of salt in the winter. I told the guy this and he said he has sold to people from the north and never...

Trading in my gf's wrangler for a more fuel efficient vehicle (but don't worry got another on hopefully lined up for us.) Looking to paint the step just wondering what a good paint would be for that. Would rustoleum be fine? Sent from my SAMSUNG-SM-G891A using Tapatalk

Looking into getting aftermarket driveshaft and control arms. Just trying to figure out what is needed first. Should I get the front or rear control arms or front or rear driveshaft first? There is a lot of front end shimmy. I have a 4 in lift and the control arm drop brackets. Looking to...

Ok so I have a 4" lift on my 2013 jku rubicon looking to see what driveshaft are recommended. Also looking for a skid plate for the steering components. More specifically my sway bar disconnect module. Any thoughts? Thanks Sent from my SAMSUNG-SM-G891A using Tapatalk

How big is a gas tank on a 4 Dr? You read in all the manuals it's a 22.5 gal but I have never out more than 18.5 and that was today and I thought I was going to run out. Why did the manuals say 22.5 if we only have like 19 or 20 Sent from my SAMSUNG-SM-G891A using Tapatalk

Hey everyone. Quick question. I got a 4" rough country lift and the coils are to weak to support the metal bumpers and winch and spare tire. Any idea for good coils? Also with the shocks I got would it be possible to make go a little taller with the coils or keep it at the 4 inch? Sent from my...

I just upgraded gears and before I try selling the old ones just want to check and see if the ring and pinion from a rubicon would fit in a sport with the rubi having Dana 44s and the sport having 30s Sent from my SAMSUNG-SM-G891A using Tapatalk