Search results

Scuba is great I've been certified for over ten years. Unless you have several people also involed with you and you plan on alot of trips renting is the way to go. I have two tanks I'll sell you cheap. My local dive shop rents full tanks for $5, $3 for a fill of yours then add a visual every...

Some clutches are adjustable. YJ's I don't think so. At least my 91 is isn't. Try new fluid. To me it sounds like bad syncros. Mine would do the same thing before it locked up and I had to rebuild it $$$$$$$$$$$$$$

Yip I got that message thanks, I'm using Pennzoil syncromesh

oops double post

Is it possible Haynes manual lists the wrong pilot bearing in the pictures. My clutch kit has both the 4 and 6 cylinder bearings. The one Haynes shows as the 6 Ax-15 does not fit my transmission also the one it shows for the 4 AX-5 was in my fly wheel. Is there the possibility that the person...

How do I get this thing off. The new slave cylinder the clutch kit came with what looks like a check valve on the feed line from the clutch master cylinder. It looks like some kind of quick release but can't figure it out so I just unsrewed the line and left the old one on. This bugs me because...

I found this site on the net and hope it will be of use to some here It is packed with great pics Thanks for the help Stu http://www.stu-offroad.com/siteindex.htm

I little surfing the net and I found this great site with excellent pics of the job heres the link http://www.stu-offroad.com/engine/ax-15/ax-15-1.htm

Here I go again with a rediculous question. Someone told me there are certain bolts on the transmission that if you touch them your screwd. The transmission for my 91 YJ 4.0l that has taken all month to be rebuilt is going in tomarrow. I picked up the pennzoil as informed but where does it go in...

thanks all I picked up the Pennzoil off the shelf at NAPA for about $6 a bottel

I just rebuilt my AX15 and am having trouble with this fliud thing. Pennsoil syncrmesh states its GL-5 but everyone says not to use gl-5. Which Pennsoil should I get and Can I use Mobil 1 sinthetic 75w-90

I have to change the slave cylinder in my 91 YJ 4.0l AX15 internal salve. The Chiltons manual does not give much information on this. 1st how do you get the old pin out? Then how do you get the new pin and washer on it,is it just tapped in? Also the plastic clips that hold the slave compressed...

Thats the one, does it just slip over

Still not what I'm talkin about. This is a little boot about 2inches across covers the piviot ball. I'm going to try slipping it over the piviot ball

I don't mean the knob up on top I am talking or typing about the part that sits in the transmission where the spring is

Ya I'm talking about the shifter handle its on a 91 YJ I don't see an allen key so I'm gonna grab it with a pipe wrench and give it a yank

I am having my transmission rebuilt. When I took it out I noticed that the boot the is on the shifter and keeps stufff from going into the trannsmission was ripped. I ordered a new boot from Jeep but can't figure out how to get the new boot on. Does the ball thing unscrew or something

I'm pulling the transmission out of my 91 YJ. I can't get the transmission to separate from the block is there a trick? I removed the 3 small screws on the bottom half that go to the dust cover thing. The two large bots on the bottom that don't seem to do anything for the size of them. The two...

Sounds over my head I'm more a part changer than a fabricator

So my 4" lift will just increase the problem then. Ok thanks for the info I'll wait for a YJ trans to come along