Search results

what can cause the auto shutdown relay to mess up???

ok thanks and ill check to be sure

ok i took it to a neighbor who is a mechanic, and at first he thought it was the TPS or a vac line but after a while he found out that it was one of the injectors. i was just wondering if by any chance an injector from a 97 dodge neon 2.0l 4 cyl would fit... also one other thing off of the...

ok so the MAP sensor is the one in the drivers side of the tb right??? and how can i clean it??? i was also reading that it could be the O2 sensor, what do you guys think???

well i took off the throttle body and cleaned it today, plus a sensor looking thing which i think is the IAC, but nothing, it still keeps on accelerating too much, plus i forgot to post it last time but it also make like a whistleing, whinning sound,that comes from the throttle body or somewhere...

i have a 97 jeep wrangler and lately its been giving me some promblems, one, the idle is of. as soon as i start it it revs to 21000 give or take and it stays there,,, today i turned it off and it didnt want to turn on again so i gave the starter some hits and it worked and also the revs went...

bofore and after but still not done.

thanks, im working on it and i already put together the doors, the hood and the headlights but thats it. i will try to keep fixing it like this and if i get stuck ill let you know, thanks again.

yea well ill probably just do it by trial and error and see what happens. its not the first thing i put togather with out knowing where things go, its just going to take me longer, but thanks if you find any thing else that can help me please let me know.

hey everyone i need help on putting together my 97 jeep wrangler. to make a long story short im painting my jeep so i had to take it apart(lights, hood, doors, door hinges, rear lights, roll cage, seats, etc...), when i started taking it apart i was putting the bolts and screws i took off on...

hey i have a problam, i am trying to paint my jeep so im dismantling it to paint every piece, but the screws on most of the body are really tight. if i get them with the socket it gets stripped. i took most of them off with a chissel and hammer but the ones on the wind shield are flat with the...

hi, every one, i have a question. i am painting my 97 jeep wrangler so i am taking it appart, but most the screws were as if the paint had stuck them together with the body. what i did was i took a chissel and hammer and took them out, but now they are all busted so i need new ones. does anybody...

i have a four cylinder 97 jeep wrangler with a 4 inch lift and 35 " tires. the only engine modification i have is a K&N intake. it runs good and every thing but its kind of slow at acceleration and slow on highway. i was wondering what i could do to get some more speed and power with out using...