Search results

I have a 95 rio grande 2.5l and have decided to do a 62mm throttle body and spacer and remove the air flow restrictor and electric cooling fan, that is where my problem comes from. I have heard that a ford taurus cooling fan works but will my factory shroud work, do I need one? And what about...

I am in the process of painting mine and im going to use a colored do it yourself bed liner paint that is uv protected. I figured i will not have to worry about rust forming again, or atleast for the life of the jeep, and and scratches and chips from wheeling would be an easy fix because you...

yeah right outside of chicago

i just went through something very similar to that, my problem was i put a lift on my yj and i didnt think i needed a transfer case drop kit and it ended up throwing my rear drive shaft completely out of wack. If its not that the grind going into 5th could be a bad syncro ring

update: My driveline angle was was out of place, threw on a transfer case drop kit and now its all gravy. Thanks for the responses

so just for starters this is an extremely overzealous post because this is at least 3 years away from happening, anyways I have a 95 rio grand 2.5l 5 speed manual. I have been looking into doing an engine swap possibly for a chevy 305 or a ford 351. My question is what exactly are the steps i...

could you figure out shipping to 60067

Thsts what i wanted to do today. Hopeing for the best and its just a lube top off.....

I have a 95 wrangler and when I am driving at speeds typically 35mph and higher when i am just riding the accelerator to maintain speed or put in the clutch i get a gnarly grinding/ rattling noise coming from what i think is the transfer case. When i put the car in four wheel low the sound goes...

That was going to be my next question. I currently have 3/4 shackles but wanted something just a little longer but have heard negative things about lift shackles. What is your take on it?

Ok so it looks like a 1" on the body is the limit, thank you. But just for a future reference what components are needed for bigger suspension lifts, or not necessarily needed but recommended for a better ride

I have a 95 wrangler and currently I have a 2.5 inch leafs, nitro 9000 shocks and 3/4 inch shackles. I want to add on a 1 1/2 or 2 inch body lift, but not sure what else I need to buy besides a drop pitman arm. Please some one map out exactly what is needed when lifting above 3 inches. Thank you

I have a 1995 wrangler rio grande 2.5. For some time now the jeep will stutter and loose acceleration until i take my foot off of the accelerator completely the reapply pressure just for the same stutter and loss of acceleration to happen 5-10 seconds later. I replaced the fuel filter and fuel...

So it looks like 33's are not the best idea, I think that im going to stick with my 31's and just go wider. as far as the engine mods that bounty hunter suggested "Consider an electric fan to replace the mechanical, a cold-air intake system, and a 62mm throttle body." what kind of performance...

Hello my name is Pete and I am relatively new to the jeep scene. I have a 2.5l 95 rio grande with 2inch leafs and two 1 inch shackles. Right now im running 31x10.5x15 bfg AT's and would like to move up to the 33's. Is there anything else I could do to push these tires besides doing an...