Search results

  1. K

    Jeep salvage yard??

    Was planning on useing cj
  2. K

    Jeep salvage yard??

    I was wondering. Can I use the cj dash or do I have to convert to the yj dash if I go with the yj tub?
  3. K

    Jeep salvage yard??

    Hey thanks, I've been looking for a donor cj and haven't had much luck finding one reasonably priced and in good shape. Hopefully being able to use a broader range of jeeps will help. By the way Johnny, saw your build post. Sweet jeep. Looks like you've done some pretty trick stuff. Thanks...
  4. K

    Jeep salvage yard??

    I'm looking for a new tub of at least some skins for my 86 cj7. Does anyone know of any good salvage yards for jeep stuff near San Antonio tx. And I hear early model wrangler bodies will work with some mods. If this is practical what years will I need to look for. Thanks.
  5. K

    Cj idles rough when warms up. Please help!

    No jetting on carb. Out of the box and on to the jeep. I haven't pulled the plugs to look at them but it seems to be running fine. I ould like to up grade the ignition system next to see what else I could get out of it.
  6. K

    Cj idles rough when warms up. Please help!

    It was a vacume leak. The manifold bolts were a little loose and the brake booster vacume line was leaking. I drove it this evening and it ran fine. Thanks for the tips guys.
  7. K

    Cj idles rough when warms up. Please help!

    Ok I have an 86 cj7 with the 258 4.2 liter. Clifford 4 barrel intake and holley 4 barrel carb. I recently put a cam and lifter kit,new carb, plugs, wires, cap, rotor and coil. I also did the nutter bypass. The problem i'm having is when take it for a drive it runs great until I come to an idle...
  8. K

    idle great, high speed rough and hesitating

    You should be able to set #1 piston at top dead center (on the compression stroke) and the rotor should be pointed at the# 1 plug wire on the distibutor cap. If it is not you will need to re stab the distributor.
  9. K

    frame mod question...probobly a stupid 1

    People lenghten, shorten, and repair frames all the time. I don't see why it would be too difficult if you had a cj5 body to measure off of.
  10. K

    Poor engine performance (no power rough idle) Help!

    I found my problem today. Started out this morning takeing carb off for cleaning and Inspection in doing this I discovered the vacume secondary butterflies were stuck and apeared to have been that way for some time. So after some cleaning, lubeing and a set of plug wires I was ready for a test...
  11. K

    Poor engine performance (no power rough idle) Help!

    Yeah I was thinking that carb was a bit much myself. I think I'm going to take the carb off today and take it apart to clean it real good. I might as well go back with new gaskets and vacume lines. It just seems it wasn't near this bad 6 mos ago. Thanks.
  12. K

    Poor engine performance (no power rough idle) Help!

    Ok here's the deal. I have an 86 cj7 with the 258 4.2 L. The motor is basically stock with a few minor mods that include 4 barrel intake and holley 600 cfm 4bbl carb. To my knowledge no internal work has been done. Now, my problem engine idles rough missing and popping slightly. When I...
Back
Top