Search results

1050508 jay89, have you bypassed your computer prior to installing your new weber?[addsig]

1051426 I completed your upgrade about a month ago and did NOT touch the timing (mainly because at the time I didn't have a timing light). To this date I haven't had any problems and am getting 16 MPG. Let me know if I should advance or retard my timing. [addsig]

1051428 I've had a couple of 2wd Rangers and all the rear needs is blocks for lifting because it is a spring over axle. The front is a twin I beam and there are three ways to raise: small lift - new springs med lift - spindles big lift - new I beams Good Luck [addsig]

1053608 :-D I didn't realize that there was any place to wheel in the Tampa area without having to drive for a couple of hours. I guess I'll have to scope out the Citrus Park Mall area 8-) [addsig]

1053718 Aloha :-) :-D [addsig]

1053933 :-) It does help, thanks. I guess to avoid having to purchase the bushing removal tool, i could just purchase the rear extension housing that comes with the bushing already included. That way I won't have to worry about removing the old one. One other thing, is it a messy job? Will I...

1053935 :-D :-D I completed the same upgrade on my 4.2 and also noticed that it was much smoother overall. However, I did NOT adjust the timing for the same reasons you identified (mainly I didn't have a timing light). Anyway, it runs great so I would hate to go against the "if it ain't broke...

1053986 :-D Roger that. I'll be making the order today. It sounds like a no-brainer. Of course, thats what everyone says prior to starting any project on their jeep. :lol: :lol: [addsig]

1054288 :-D Go with the 6 and less miles to boot![addsig]

1054298 :-) I also have the 89 with the 4.2. In addition to all the previous good replys, I HIGHLY recommend the ignition upgrade located on the site in the "How To" Section. Basically it adds a more powerful coil, larger distributed cap and regapped plugs. I completed the upgrade in an hour...

1054334 :-D 8-) :-D Tie me up and make me watch Rockford Files re-runs :lol: :-P [addsig]

1054407 Like west 747, I got an 89 YJ 4.2 and I hold straight up (45 psi) through out the rpm curve. That is after warm up. :lol: :lol: [addsig]

1054408 :-O :-O You all are going to make me start watching the TNN re-runs with all this risque chatter! ;-) ;-) [addsig]

1054588 The BRUTE is bad a$$. :-) I would live to get one but the funds won't allow it. Heck, I can't find enough spare coin for a real lift and some meats, gears, lockers, etc.. I can hardly get enough to conduct the required repairs/upgrades let alone get something from my "dream sheet". Ah...

1071185 :-D DEFINATELY buy the ring on your own. As the years have passed I can't count how many times I've heard "and he picked it out on his own, I was so impressed". That alone is worth more that gold. Since it sounds like she already knows that you are going to look - do just that -...

1071221 This may tak a bit longer, however you will then be sure. Remove the speaker grill, take out the screws and look at how the wires connect to the speaker. The one with the smaller connection is the negative. Good luck. :lol: [addsig]

1071806 The only one I could find on my 89 is in-line prior to the carb. 1 in and 2 out and easily changeable.[addsig]

1072077 :-D Check here at Quadratec for tops the prices are reasonable. I have a Bestop Super top and it works great! Good luck with your search.[addsig]

1072078 Awesome! Please remind me, what size are your meats again? Your pictures are giving me the bug! :-D :lol: :evil: [addsig]

1069902 :-( Thanks for the replys. I guess I was hoping for that amazing, perfect fix. I took the carpet out because when it would get wet, it would stay wet underneath which finally equaled a rusted floor board. Oh well, back to the drawing board. :-) [addsig]