Search results

1048519 Where is the master cylinder fill cap for the clutch in a 95 YJ? I want to check my friends who is having the same prob. I'm only familiar with AMC engines[addsig]

1050371 For all the really dedicated CJ guys, " Sorry, I didn't mean to scare you sisters Wrangler" that hurts! [addsig]

1050615 The Triton V8 is in the F150 AND the Expodition, so why just SUVs, what about pickups? Same hardware, less seats. Anyway, what am i supposed to use to tow a boat and RV? Not some 3 banger Geo metro thats for damn sure. I guess i'll have to buy some horses.[addsig]

1042380 Hey Berreta, I am in Kent too but My CJ is back in Youngstown for the winter getting a makeover and mods. I have a line I have to check on for a guy in Canton who is supposed to have over 50 parts jeeps and tons of other stuff.[addsig]

1042469 Apex? please explain[addsig]

1042525 If those are tan denim seats in the levis edition, let me know if you ever plan to swap them out, cause i would love to get my hands on one of them![addsig]

1042617 I would say besides the obvious like transmission, and engine look at body mounts and see how bad they are around the rear tire where the cancer starts. I've seen them almost rotted out all the way through the floor. See what degree of body rot you are looking at and your ability to do...

1042182 I'm looking restore my tan levis edition interior and replace my drivers seat. Any one who has a drivers or passenger seat (no mounting hardware needed) in decent shape let me know. [addsig]

1042244 The piece that extends from the crossmember that the rear body mount attaches to is totally rotted on my 79 cj5. I need to remove this old piece off and spot weld a new one back on before i can replace the body mounts but i don't know if i can find this piece after market or if i...

1042264 I was wondering how much lift I would get with a Cj5, all OEM and what the pros and cons were to add a leaf style lifts[addsig]

1042373 How much stability am i really going to loose if i replace oem o my 79CJ5 with slightly larger shackles (About 1") just to get a moderate lift. I have also heard that changing the shackles is a job that looks easy but really turns into a pain, so what is the easiest way to do it.[addsig]

1042385 Who can think of the most obscure jeep special edition? I got Tuxedo park, Renegade, Golden eagle, laredo, Jamboree, Golden hawk, Rio grande, Sahara, Limited, and who can forget "Super Jeep" with a chrome roll bar and snazzy red white and blue trim ![addsig]

1042527 This is my first project as a Jeeper with my 79CJ5. I am ready to dive but I am not sure what the best order to approach the work is. The list is, Body work (some panel welding, duraglass everywhere else), paint job, shocks, tires, 1" greasable shacks, carb rebuild or replacement...

1043702 The longer shackles work by flattening out your spring therefore raising your ride height. I've seen some pretty bad bump steer and just a terrible ride in general come from shackle lifts. Its just not natural for the springs to be that flat. If you are going to do some serious...

1044546 While working on my rust problem on my corners I contemplated building a drop down style tailgate in my 5 just for the hell of it since i never have my back seat in anyways. I realize that it is not super practical with the soft rear window and all, but it will be different and...

1045040 In the back of this months JP magazine there is a picture and a small write up of an all Jeep junkyard. All it says is the guy who sent the pic in is from Langhorne. Does anyone know anything about this yard o town that lives in Pa? I live In Ohio about 45 min from Pittsburgh. [addsig]

1045878 Has anybody painted diamond steel rockers or corners or seen any painted. I've never really seen it done and thinking about doing it. I Don't really like the stainless look. just wondering if there was any particular reason it is so rare. (or maybe i just haven't looked enough)[addsig]

1046033 I need to replace the rotten hat channel on the body that the mount goes up through. Someone suggested taking 1"-3" square steel tube and bolting it to the body. Can anyone offer any input on this method, if it will work or maybe some other fixes you guys have thought up . This is my...

1046433 can someone explain to me how dif breathers work, pupose, installation etc. thanks[addsig]

1047139 I have a fiberglass hood i got a good deal on and I want to put it on my OEM steel body since the steel hood is damaged. What hardward do i need to make it happen and where do i get it?[addsig]