Search results

1069788 I didn't feel like reading the link, but here's what I did. First make sure that both halves of your windshield frame meet up where they are pinch welded together in the glass opening. Mine was not stamped out just right and it cost me a windshield and alot of time before I realized...

1065745 Yeah, I don't know about that one. I used 90 weight gear oil in my T5, that's what I planned on usind, and what everyone told me to use. Try it and tell us how long your T5 lasts. As for me, I'll stick to my 90 weight![addsig]

1057285 Well the benifit of LED's are that as said before, they are really bright. They also draw very little current and last a friggin long time, not sure how long but 100k hours seems to stand out in my mind. It's a good upgrade in my opinion, I'd do it too, but I'm going for the classic CJ...

1056588 I pulled a stunt close to that. I went out with some friends one night and being the idiot that alcohol makes you, got in and drove home about 30 minutes. Well I got about 5 minutes from home and fell aleep at 80mph in a 40mph. The gravel on the shoulder woke me and of course I...

1048976 I laughed when I read this one, "The reason I lifted my Jeep is 'cause fat chicks can't climb" I want to have one made up, but I'm not wanting it keyed. [addsig]

1049928 I use rubbing alcohol, works great, it will work on paint too. The clear coat is not affected by it either, but you will have to re-wax the paint you use it on. It works great on windows, rubber, everything, and it's cheap. Good luck.[addsig]

1042422 Nah, don't think so, it does fine with cold starts, shuts off like it's new. But when it gets warmed up and you try to shut it off it won't do it.[addsig]

1042426 This crap is aggravating I have to pull the vacuum line off the carb to kill it, any comments I would be thankful for any tips[addsig]

1042450 Ovilla, Texas here, it's a small town about 30 minutes south of Dallas. Not much going on here either[addsig]

1042603 I had the same problem, all I did was take a couple wraps of black electrical tape around the pcv. With the grommet I took it out and put some rtv around it and good as new[addsig]

1042647 I just used it cause it was black. You could use some high temp fiberglass tape, works good, just not when you have a cylinder running extremely lean and the exhaust manifold is glowing red hot and melting your plug boots, the tape will only last a short time, but it'll get you home...

1042648 I have a guy in TX that will put in any gear option, all bearings and seals, do the job right for $500 per axel. I'm sure he's a little high priced, but that's what people down here are charging to do it for you.[addsig]

1042652 anti lock brake booster? do the new ones have abs? Hit a bump right before letting off and it'll set em off[addsig]

1042654 I know you can buy a lighting wiring kit from just about any local auto parts store. I'm not sure of the amperage of the relay, they are usually for the crappy 50watt setups used on the ricers. Hope this helps, I'd try to call KC first and price their origional setup[addsig]

Take your radiator to a good radiator shop and have it redone. The one in my 83 was clogged and in poor shape. It came with a two row and I had him put in a three row just in case. This only cost me $175. This would be your best bet, because if you go to a wrecking yard and buy one from a...

1043275 not hard at all, just make SURE that you positively mark where the needles were positioned, warm up the engine,while it is running draw out what the gauges look like and then take the needles off. With the good white faces, you take off the black, don't leave it on, your lights, check...

1043276 not hard at all, just make SURE that you positively mark where the needles were positioned, warm up the engine,while it is running draw out what the gauges look like and then take the needles off. With the good white faces, you take off the black, don't leave it on, your lights, check...

1043280 sorry about the double post, my computer was acting up[addsig]

1043305 I know you can get other makes and model styles from any good accessory store, just have them look it up for you, if it's in there they can get it. APC has the most available. I think it is New Image that has the ones that look like flames. A buddy of mine has them on his Chevy, they...

1043355 MH83CJ7258@aol.com Mikey[addsig]