Search results

  1. J

    Can I swap an emmission controlled steppermoter carter bbd f

    1059641 You can replace it with a weber carb. It will replace alot of the emission hoses. It comes in a kit all you have to do is bolt it on hook up the throttle linkage and adjust it. It comes with an 800 number if you need help.[addsig]
  2. J

    87 YJ Need New Carb.

    1059642 Here is the website for collin bros. www.collinsbrosjeep.com I actually got the carb from them on Ebay. It was new and came with everything you need. It comes with directions and a 800 number for tech support from Redline Weber. If you have any trouble just call them. It is fairly...
  3. J

    JEEP WAVE

    1059643 Personally I think waving is gay! :-O [addsig]
  4. J

    Ingition Problems

    1059778 Could be the ignition module?[addsig]
  5. J

    Reliability of console locks

    1059780 No the stock locks can be popped with a screw driver! You should look into security consoles or glove box safe at Quadratec. They are a little expensive but if you like every other jeeper and have your top off all the time they are worth it.[addsig]
  6. J

    history of theft of jeep parts

    1059782 I live in NJ the stolen car capital in the US. I had my drivers door taken and someone stole my battery. That was a problem anyone could open the hood. I got some hood locks and door locks haven't had a problem since. Even with my top off. I keep the radio and everything else concealed...
  7. J

    CD Changer skips!

    1059851 I was thinking of mounting it on springs.[addsig]
  8. J

    I keep getting puddles on the floor!!!!

    1060154 I recently changed all my hardware over to stainless steel and noticed the water was coming in from the windshield hinges, it was coming thru the mounting holes. After I put the new ones on I used clear silicone aroung the hinges and no more water on the floor. :-D [addsig]
  9. J

    CD Changer skips!

    1060156 I replaced my shocks this weekend and believe it or not the cd player hasn't skipped yet. :-D [addsig]
  10. J

    indicator dash display dosen't work

    1060236 Did you do any work under the dash. Sometimes you can knock one of the plugs loose. There are 2 - plugs on each side of the cluster. They are wide about 6 pins. Mine had come loose once where 1 or 2 plugs were making contact once I reseated them all the lights work.[addsig]
  11. J

    First post here! Which fuse is it?

    1060237 Look for the acc fuse. It stands for accessary. I not just use a test light it is a lot easier then pulling fuses and having to reset everything.[addsig]
  12. J

    Maint. required light

    1060371 The box on the fire wall actually can be reset. There is a little hole in the back of it where you can see the white gears and there is a little metal arm that looks like it is jammed in the teeth of the gears this is what sets of the light. Just reach in there with something small and...
  13. J

    258 Valve Cover Gasket

    1060372 Try a search for felpro?[addsig]
  14. J

    Dome Lamps

    1060373 Just unplug the wires this way if you turn them on with the interior switch they still work.[addsig]
  15. J

    shocks

    1060375 I got to tell ya I just put in Heckthorne Rough country's this past weekend and they are pretty smooth my cd player even stopped skipping. :-D [addsig]
  16. J

    Turn Signal Snaffoo

    1060376 The only fix is to replace the whole lever. It is a pain too. You have to take apart the column plus unless you can find one at a junk yard that works it is very expensive at the dealer.[addsig]
  17. J

    Maint. required light

    1060475 It should be just to the right of the gas pedal. Is is a smoke colored see thru box.[addsig]
  18. J

    Bikini Top install question

    1060583 I think your talking about the 2 snaps that go on each end of the bikini top on the windshield frame? I didn't even install them because like you said they didn't fit. The footman loops I mounted behind the roll bar on each rear fender. But make sure you mount them directly behind the...
  19. J

    clicking noise when attempting to start jeep

    1065922 Sounds like it could be the starter solenoid.[addsig]
  20. J

    Sqeak gone Vibration started All in the same day!

    1065924 I had a vibration and I had the drive shaft balanced. 45.00 and it is gone now. ( the vibration is gone not the drive shaft)[addsig]
Back
Top