Search results

Hi, Who Irons work clothes??? What's in my center console: Cherokee: What's a center console? (This Cherokee never had a center console for some odd reason) :? Wrangler: A whole lot of nothing. ( The lock button is broken and only works when it feels like it. Because I haven't had a chance...

RE: New lift??? I agree Tug. We have such a outstanding community at these forums! It always amazes me to see the quality (or should I say lack there of) of some of the other forums on the Internet. To me Jeepz is THE place to talk Jeeps (or whatever other topic I manage to digress a...

Hi, Keeping your computer secure and free of trojans/spyware/adware/viruses etc is a multi-step process. The first thing every computer on the Internet should have is a firewall. There are hardware firewalls such as most Cable/DSL Internet routers, and software firewalls which run on your...

Going newer... Got Questions. Hi, I'd think the extension cord idea is the better way to do this. That is, plug the male end of the extension cord into the inverter's AC outlet, then chop the female end of the cord off and solder the wires to a mountable AC outlet. This way you're not opening...

Hi, Electric motors are pretty tough. Running a higher voltage through them (such as what a bad alternator/ voltage regulator might do) isn't going to hurt them. Yes, they tend to get a bit warmer, but there really should be no killing involved. On the other hand, the battery voltage might be...

Re: RE: Re: RE: Question about Spanish radio Hi, Keep in mind that the relays themselves are not what's making the lights brighter. The lights are brighter with the relays installed because you are significantly decreasing the length of wire between the battery and the light sockets (you no...

Hi, Maybe his web applet is messing up and inserting incorrect shipping figures. When I ordered from him it was via phone... -Nick :!:

Hi, From what I can tell, the Cherokee headlamp switches are not very well designed... -Nick :!:

Hi, After I made my Cherokee an EV, I had problems with my rear drive shaft being a tad too short and the u-joint angles a bit too extreme. This was due to my 3" lift kit and also that the geometry between my slip yoke and the differentials changed some. To combat this, I first got 2 degree...

Hi, Hissing is most always caused by the brake booster, as there is really no other component in the brake system which will make that sound... Bleeding procedure should be you start from the wheel farthest from the master cylinder (as far as fluid travel is concerned), then end at the wheel...

Hi, I can't remember shipping costs being any problem when I got Rusty's 3" lift kit. Have you called them to see what's up? -Nick :!:

Hi, Almost all modern Hard Drive based MP3 players (including the iPod) also function as external hard drives. That is, you can connect one to a computer and copy other files to it just like a normal hard drive. Windows should do this automatically. Though on some versions you may need to...

RE: grille guard questions Watts up? I hope you didn't find my choice of words revolting. :P Ahhh, Ample bad electrical humor.... just what we needed tonight :mrgreen: -Nick :!:

LOL. Nicely done, Gadget :mrgreen: -Nick :!:

Hi, Maybe Sully or Bounty Hunter could split all of our posts regarding Telephone lines into a new thread??? I really didn't mean to clutter this thread with facinating, yet irrelevant information... :mrgreen: -Nick :!:

RE: Re: Here are some progress pics Hi, The ring generator I bought doesn't appear to be very old at all. I don't know when it was made, though. I'm not disputing that you work with telco stuff everyday. I believe you. However, I've found that the ring signal here is different from what you...

RE: sm420 Hi, These are quotes from multiple web sites I found after doing a yahoo search: According to these sources, ring voltage *could* be as low as 40 volts, but I still believe it to be much higher, as the other sources indicate. Not only do I believe this because have built my own...

Hi, I'd suspect that's true, but only under the right conditions. But anyways, that is why anything over 50 volts (to be precise I think it is 42 volts nominal), is considered "high voltage", because the resistance of our skin is such that we can easily get shocked at this voltage and anything...

What's that? :P -Nick :!:

Hi, As far as I know, welding machines run on voltages of 48 volts or less. Thus, they depend on high current to make the arc, not high voltage. At least I know mig welders do. The risk of getting electrocuted is greatly minimized at voltages below 50 volts, which is why anything below 50...