Search results

Mine is 1" but I think they r all different I have an 03 I put 2 12" subs and two lights on my roll bars right where lights and sp was from factory hope I helped Good luck

Just take it out and run it on the road s bars or mostly for curves or corners if she does fine there I would not add if u don't like the way she feels get an adjustable one I'd like to start another old jeep rebuild myself soon Good luck

Start with u joints ck them shake them look for rust if nothing try ball joints jack front up get 2x4 or something about 4' long slide under tire and lift see if u get any play or sounds

I had a friend ask me last Friday if I needed a 91 yj 2.5 they just took out of his sons and put a 350 runs good but it's in tx maybe really cheap also it was not everyday driver at all not sure how to get it to ya

Have u tried an air chisel?

There is 11 body mounts on my 03 tj 1 in the center radiator 7/16 3 on each side1/2 and 2 in front of gas tank 7/16 and 2 by rear bumper7/16 I just did mine with a rubber pad they use to hold up road construction cone it worked really well 1 3/4 lift I just took a 3" hole saw and knocked...

Fast easy test take drive line out and drive if it stops u joints

I would start with u joints how old r they mine have gone out every 4 years almost to date and two weeks ago mine did the same noise I started there and all were bad even knuckle joints on axle

Front drive line most likely try to get some with grease sert

Lol u joints if there is rust there bad

I'm from Durant OK

I just fixed a clicking noise I would get a good look at all u joints look for any rust start at t case mine has two u joints there and they looked fine with no slack but when I replaced they were bad so I did drive lines and knuckle joints and only one tested bad but all were. ck the pads on...

I'm 20 mi east of dallas and we have about 3" now so maybe you'll get to play a little

I think 30/10.5-16 Goodyear not sure the guy only had 67 mi on his jeep when he got there so what ever comes on 4 door jeep from factory

Cool I put new air filter on mine and it made so much difference I can't believe the power I now have

Damn luck almost ever time I use one I break them off. I had one lock up last year while driving. They don't cost much but you will need help to bleed it.

Thanks not sure what section I'm in lol

That's good should be able to use an easeout and take care of that bleeder in no time

I don't need them there in Terrell tx 20 mi east of Dallas

I went by my tire shop today to get a low tire fixed and they had a new set of factory jeep 2010 wheels and tires 16" aluminum for 300.00 not sure but think it's a good deal