Search results

If I figured right the 7" with the 4.5 will put you where you are at now with the 8 's as far as the outside edge, but you will now be half inch further away from the frame which is good. Good luck

System Clock I have a brand new set of the bushwacker extenda flares for a tj they are still in the box. I think the just fasten on with double sided tape from 3m, am asking 225.00 not sure what the shipping would be I live in central Pa.

Running 4wd on a hard dry surface you will always have this problem.

Forgot also was your flywheel new? Chevy motors have been know to crack around the bolts causing a vibration under power and also when you come off the power.

Before you spend the 350 check your pinion angle make sure they are the same at both ends if not maybe you could pick some of the angled shims for the rear to change it before you spend the money.

Air bubble in system plus the junk floating in the system likes the heater core whenever draining system flush it. Also use distilled water.

Are they manual hubs ? I f so go to advanced auto they have a book that lists the hub nut sizes.

They have to be hitting the calipers or your wheel should be easy enough to see which. Apparently they are to big

If the 02 sensor goes it can take the cat with do to running rich.

Jeep at one time did put 304s in the cjs just got away from them when gas prices went through the roof besides the 6 makes it power down low where you need it for wheeling. There are rumors that it is coming to an end though (3.7 v6) we shall see.

Add a winch to the front.

Do you have a dremel tool if so cut a slot across head of bolt turn out with a large screwdriver. When putting the new ones if use anti seize lube.

New Wrangler (TK) has been axed by DC Go to kelly blue book that will be a start.

re: Give it a little shot fo belt dressing .

1062453 I love you guys that think you are above the law. Its funny when you get behind me flashing your lights like you are in germany on the peoples highway then you get to drive slower behind me. The best part is that it just destroys your day don't you think there are plenty of things wrong...

1062455 I've got the best idea people of ny nj stay out of pa!!!![addsig]

1058822 I think an arb bullbar sure would help those tube types I dont think offer much protection.[addsig]

1058824 Thats funny my annoying noises come from the passenger seat.[addsig]

1058825 I have an 03 getting the same noise but mine is the dana 44 rear soon to go to the dealer. The sound does it go away under power then when you back off the gas a little bit you can hear it that what mine does I think pinion bearing.[addsig]

1058827 I drive truck the leds are nice the only problem with them is the put off no heat so running in the snow they will not clean themselves off.[addsig]