Search results

I ran a 4 gauge wire and then ran a splitter right at the front of the center console to run two 8 gauge power cables for each amp. Then I sprayed a leftover MDF board with truck liner so I could mount the mids/highs, 4 channel amp to the board (and the body underneath). I did have to make some...

So here is how I mounted the equalizer in the glove box. I cut out the back end for all the RCA connectors to run through and it was just far back enough to not hit the latch while I closed it. The hole I put in never interfered with anything that was in the dash either. The next project was to...

Just like with Terry's post I had to cut open the seat, cut the support rods for the cushion off the frame, gut the foam so that everything could fit, and then shove it all back in. The pictures get sporadic at the end because I was kinda dragging my feet about the whole thing (worried about...

Cut the sub hole and secured the top piece. Then drilled holes and used 1/4" tee nuts to secure the sub to the box. I added the wire terminal on my own, I know some people might say "that's just an extra connection that could screw up," but I wanted the option to pull the seat out if I ever...

Beginning to put all the pieces together. I used wood glue and screws to secure everything together and then sprayed sound dampener and caulked the inside of the box just to make sure everything was sealed. I would definitely recommend pre-drilling if you're going with screws because that's how...

Cutting the pieces and prepping. I don't remember what thickness I used. I do remember SirGCal had the recommendation for thickness but I can't remember. I do know that the inside volume of this particular box came out to .87 cuft which is what my sub recommended.

So I initially came across this post probably about 9 years ago and I got super interested in putting a box in my 97 TJ. I found SirGCal's site and downloaded the schematic that he had created and put my woodworking skills to the test and built my own box for a single 10" sub. Recently (Sept 21)...