Search results

I have bought a set of fiberglass fenders from 4wd hardware. Has anyone put a set of these on? I knew i had to cut holes for all mounting points, flares, side markers, etc but i have had to cut part of the inner fender out to clear my shock tower. Is that common when installing these fenders...

Well i have a 83 cj7 and have replaced all my tie rod ends, steering shaft from column to gear box, ball joints, springs, shakles, all other bushings, sway bar kit, drop pitman arm, shocks, tires, and tightened up the gear box. and mine still wanders a little, there is still play in the...

Ok, i know you have probally beaten this subject to death but here is my question. my shackles measure 5 1/2 inches between the center of the bolt holes. which means they are 1 1/2 inches longer than stock ones. Is this going to be a problem for the CJ7's handling on the road? How much...

Here's my problem, my wife says i have a problem with 4x4's, I own 4, and want to buy another jeep. This is what i have. 1995 Dodge Ram 1500 3" lift, 33" good year wrangler MTR tires, stainless Smittybuilt nerf bars and brushguard, Has 2001 Dodge infinity system, 5.9L magnum/auto, power...

Spring lift at rear causing noise/vibration? Hey, I am looking for advice on what fenders to buy to replace mine. I have 2 options aftermarket Metal fenders or 4wd hardware fiberglass. Has anyone ever had experience with fiberglass fender from 4wd hardware? I have been told fiberglass hoods...

Do you still have these available, i will take them if you do

hey, Intersted in the flares, do you have a picture of them, and how much extended are they? 6"? send me an email direct at jasonvess@yahoo.com

thanks that worked

I have been trying to link a photo to my signature everytime i make a post, and it won't work any suggestions? Here is the web address of the site where the picture is http://www.cardomain.com/member_pages/view_page.pl?page_id=565417&cat=25&val=1 Thanks

ok, i was suggesting the shakles only as a cheap temporary lift, like you had asked for. I agree to not leave them in, it would just get you by until you can do a spring over or purchase new springs or whatever.

try a 2"-3" shackle lift it's cheap and easy I paid $60 on ebay for a set of 4, and i was able to clear 33's

well everybody, i did the turn the tire thing and count the driveshaft, since i can't find a code on the rear axle, and the tag is not readable on the front axle. The Driveshaft made just a little more than 3 1/4 turns to the tires one turn, so i am assuming i probally have the 3.31 gears...

great thanks for the quick answers

I am looking for both driver and passenger side FIBERGLASS fenders for a 83 CJ7. Anyone got any used ones? Or do you know where i can get them new cheap?

I have a 1983 Jeep CJ7 258 6 cyl, 4sp manual dana 30 front axle/amc 20 rear. Does Anyone know what the stock gear ratio was in these axles? What would be a good all around gear for some highway, some trail driving with 35's? I don't want to lose my jeeps drivability on the highway, but i want...

I am in Mid Michigan, Near the lake Michigan shoreline

wanted CJ/YJ Fiberglass Tub For sale a set of 4 Goodyear Wrangler MTs 35x12.50 R15. No weather checking, or known patches or holes, tears etc. Tires are probally 30-40 percent tread but one has more wear and needs to be replaced due to an alignment problem on the truck. Must be pickup in north...

4.88 Gears for front dana 30 only $99 because I'm stupid. I am looking for Fiberglass tub for a 76-95 cj/wrangler, must be in good condition, will also consider a yj RUST FREE Tub please send pictures and price to jasonvess@yahoo.com

ok here is imagestation

Ok everyone, i think they are sold but thanks for looking, if something changes i will post it.