Search results

  1. B

    YJ Lift ?

    Has anyone ever tried a spring over lift after putting on a 3" spring lift ?
  2. B

    built sb Chevy v-8 problems Help!!!!

    I don't have any experience with a 350 in a jeep or with all the mods that you have but when I had my 85 blazer I bought the same edelbrock carb for my 350 rebuilt .30 over and I could never get it to run right so I went back to the quadrajet and it ran fine but that is just my experience.
  3. B

    fast back roll bar and stuff

    RE: Comp cutting the Jeep What is a fastback roll bar? is that the roll bar with the sholder belts? I have been looking for some I'll buy if that's the case. swkarol@hotmail.com
  4. B

    Motor Oil

    I run Amsoil in every thing I own, motor oil, atf and gear oil you don't have to be rich I found that in my Ford diesel it's cheaper, it takes 4 reg.oil changes to 1 syn :lol: . and the truck has 170000 miles on it. Oh and if your motor leaks FIX THE DAMM THING!
  5. B

    I am looking for engine upgrade tips for a 4.2 rebuild.

    RE: Standard & reverse cut Ring & Pinion Best bang for the buck go with the 4.0L head and save the rest of your money for gears,lockers,tires,take the wife out to dinner,take the girlfriend out to dinner,go to the strip club and etc. How much HP do you really need for a jeep?
  6. B

    Still getting oil leaks?

    Re: RE: Re: join date I agree with wrangles look at the rear of the oil pan. I had the same problem.
  7. B

    Another @$%^%^$# brake question

    RE: Stroking a 4.0 Well I installed a MC 2100 and it seems to run fine
  8. B

    Another @$%^%^$# brake question

    When at idle I step on the brake pedal the damm motor will die is this a vacuum leak? if so what do I look for?
  9. B

    NP231 with upgraded input and SYE

    Do you still have and do you have the drive shaft to go with? BD88YJ swkarol@hotmail.com
  10. B

    Active Jeepz.com Members, Make Yourselves Heard!

    RE: Re: RE: Back to Virginia BD88YJ checking In!
  11. B

    Dana 35 diff.cover

    RE: WILLYS JEEP What works for you guy's ? I have put on 2 gasket's on my diff. cover and both of them have leaked. should I just use RTV silicone or a better gasket material or both?
  12. B

    ROLL OVER Angle??

    I have a YJ dont know the angle of tip on it but now I use the O-SHIT! method when I say that I know I am getting close because that is what I said 10 sec. before the first time I rolled it. HA HA Also when are going to give me more info on that YJ you want to get rid of? BDYJ
  13. B

    Tire Pressure?

    I dont know if this will help but I run my jeep at 35 psi and I have done this on two sets of BFG M/T's and seems to work for me,but its not my everyday driver. On the other hand I have a F250 superduty, 4x4, diesel,Crew cab(heavy bastard) that I run at about 5psi higher than recommended, due to...
  14. B

    want a YJ? Come and get it

    Derek, Do you have a pic? I'm Interested in it and I'm located down here in Austin,Tx.. swkarol@hotmail.com
  15. B

    Pitman arm removal

    PING! Was that the wife or the pitman arm? lol Just Kidding
  16. B

    Revolver Shackles

    Bounty is right put them on the back only. My YJ became a Y-SWAY and I ended up selling them to a(sucker) I mean buddy of mine. No really, they work good on the trail but for me the highway sucked.
  17. B

    Pitman arm removal

    RE: Revolver Shackles I had to use a pitman arm puller,PB blaster,BFH and heat to get mine off.GOOD LUCK!
  18. B

    #@$%!*&^ red light

    Revolver Shackles Thanks Guys! I bled all four wheels but not the master cylinder I'll try it.
  19. B

    Paint

    Re: #@$%!*&^ red light Sorry, www.autobodysupply.net
  20. B

    Paint

    RE: #@$%!*&^ red light If you are painting it yourself and price is not an issue,PPG or Dupont is more user friendly. I painted my jeep last summer with matrix paint and for me it was alot harder to spray lot of color sanding but it was alot cheaper and came pre-mixed ready to spray and has...
Back
Top