Search results

Well I found a web site that showed a picture of my transmission. It is the Jeep T18. So now how do I determine if it is a T18 or a T18A? Is there a way to tell the gear ratio by spinning the input shaft?

Well this weekend I was preparing to marry up my supposed T18 to my SBC. Novak claims this is fairly simple with a little machining to the retainer. Well the transmission that I thought was a T18 doesn't have the Ford "butterfly" bolt pattern and it doesn't have the undrilled ears that Novak...

I used the Herculiner roll/spray on bedliner on my CJ last summer. Bought if from the local Autozone, around 100 bucks I think. Turned out real good actually. A few things though.... 1) Preparation makes all the difference. The more time you spend taping up stuff, cleaning, scuffing, etc the...

Did you think about heli-coils or drilling and tapping a size bigger?

Ok, here's what I got. A chevy 327 in an 84 CJ7. This was a swap project I started many years ago but I got layed off and moved a few times. Now I'm ready to get back to work on it. I have a Ford T18 transmission stuck to a Dana 20 t-case that I want to bolt up to the motor. The below link is...

Now I'm sure this type of thread has floated around a time or two before but I would still like to hear some opinions. I have accumulated quite a bit of "Jeep junk" over the years but now I want to make a solid good looking jeep. What I have...... 84 CJ7. Perfect body no rust on the frame. It...

Can you email me the pictures? sjo426@yahoo.com Thanks!

What motor did it have in it? What about transmission and t-case? Do you have any pics you could send me? Thanks.

So a T18 will bolt up to a 360 but a Dana 300 will not bolt up to the T18. And a T176 will bolt up to a Dana 300 but the T176 will not bolt up to the 360. Not without some adapter plates anyway. So am I correct in thinking that the T18 is a stronger transmission than the T176? Making it best...

I know there is no one great answer here but any input would be great. This past weekend I drove my 78 CJ7 (304/T150/Dana20) to the seymour jamboree. Well on the way back let's just say I had some major problems and limped back on just the front axle. Well the engine is tired and I hate the...

That's addicting...I got 54 as well....

Oh without a doubt after I read again I thought "should have been more specific". No worries.

I understand the difference is size. I meant does .25 and .5 really make that big of a difference overall. How much effect on the ride does a 1 inch spacer have compared to a 1.5 inch spacer. thanks.

I have a 78 CJ7. Looking to get some wheel spacers. Is there a big difference between 1 inch, 1.25 inch, and 1.5 inch thickness? Thanks!

Ok, I have a 78 CJ7 w/304. It has the T150/Dana20. In the garage I already have a World Class T5 with a Dana 300. Now this may not be the most desirable combo it is better than what I have now. So this weekend I am swapping them out. Well when I got the transmission up in there I just couldn't...

Without a doubt the WC T5 is not my first choice, but since I have one already and like everyone else I am on a budget I think it will be worth it.

The bell housing I have came off of a 258 out of a 84 CJ7. So it sounds like everything should line up. Right? Thanks again for the info!! You have made my research and decision making that much easier.

Thanks for the info. I have very little experience in swapping or modiying so I hope my question don't sound dumb. I do have the original bell housing that the T5 will bolt up to. But will it bolt up to the engine?

I know the transmission questions never stop but.... I just got back from my first wheelin trip and my T150's first gear is just not low enough. Now I am looking for what are the best options. I do have a brand new World Class T5 transmission stuck to a Dana 300 T/C. But will it bolt up to my...

Re: RE: Re: RE: Re: RE: Suggestions... Well based on what you guys have said and taking the cover off the transmission hump in the interior I am pretty sure I have the SR4. I assume this isn't as desirable as the T176. I do have another option but again I need some help identifying another...