Search results

  1. Bond--007

    Changing the transmission fluid this weekend

    I thought the same thing. I read the posts again and it stated they used 10w-30 motor oil and they even stated a dealership suggested it. The other one everyone was posting about was a Redline MT90
  2. Bond--007

    Hesitates in 2nd gear and/or Sputters in 1st and 2nd

    Greg, I still have the scanner until Monday when he needs it back. I did see where I can switch it to a data streaming and where the indicators for both O2 sensors are. I'll write down what the O2 sensors report at idle and at highway speeds. Should I warm the jeep up first like I was doing...
  3. Bond--007

    Changing the transmission fluid this weekend

    I'm going to be changing out the transmission fluid this weekend. There are 196,218mi on the jeep and I know nothing about the age of the fluid. I have read several posts and would like some input. I was going to put 10w-30 in it but trying to determine Syn or Conv. Is there a pro/con of each...
  4. Bond--007

    Bumper Hitch on TJ

    Ok guys. So I'm trying to make the Jeep a DD and also use it for hunting since it's cheaper to run than my F-150. Here's my thoughts. I have a hitch basket I use on the truck for vacations and such. I found a small Class I bumper hitch that you drill the mounting holes in the bumper and use the...
  5. Bond--007

    Hesitates in 2nd gear and/or Sputters in 1st and 2nd

    Update: Last night I was able to borrow my buddies scanner. When I hooked it up, there were 2 stored codes in the system. (1) incorrect purge flow (2) Misfire on cylinder 3. I cleared the DTC figuring these may have been stored prior to me changing the purge solenoid and the cap, wires, rotor...
  6. Bond--007

    Hesitates in 2nd gear and/or Sputters in 1st and 2nd

    JPN, thx for the info. I'll try to spray each line over the course of the weekend since it's suspose to be nice. I remembered a trick dad would use to find a tire leak with soapy water but it seemed like a bad idea since vacuum line draw air in instead of blowing out
  7. Bond--007

    Hesitates in 2nd gear and/or Sputters in 1st and 2nd

    Greg, what is the easiest way to check vacuum leaks? I know I have one I can't find yet because the vents and floor doesn't work, just the defrost (I found where the vacuum hooks onto the intake, so now I need to trace it out)
  8. Bond--007

    Hesitates in 2nd gear and/or Sputters in 1st and 2nd

    Thanks for the info guys. My buddy is bringing his scanner tonight since it does real time data logging. Currently the CEL is not lit but I'll scan it to see if something is stored but wasn't critical to trip the light. New development: Since it was chillier this morning than most, I decided...
  9. Bond--007

    Hesitates in 2nd gear and/or Sputters in 1st and 2nd

    Hi guys. Been crawling all over the web to determine what is causing my issues. Recently got a 1997 TJ with a 2.5L, 5 speed manual. (1) Every now and again the jeep with spit and sputter in 1st and/or 2nd gear until I press in on the clutch and give it a little gas. Then it will smooth out and...
  10. Bond--007

    Anyone in the Franklin County Area?

    Are there any members in the Franklin County area? I'm located in Mont Alto
  11. Bond--007

    New Jeeper from PA

    Hi everyone. Recently purchased a 1997 Wrangler w/ 2.5L as a daily driver. New to the Jeep game and trying to learn what to do and what not to do on the Jeep. Leon
  12. Bond--007

    Bond--007

Back
Top