Search results

RE: Pull pull pull SNAP! took me several tries but I got it work.

RE: Re: RE: kumho mud tires Just a quick FYI on switching your inverter on remotly. My first 300watt inverter I was able to reset it by just killing the 12 volt supply to it. On my new inverter I was not able to do that so I had to splice right into the switch inside the inverter so I would...

Here is where you can find the flush mount sockets used in the inverters. I have ordered through these guys before and have not had a problem. http://www.allelectronics.com/cgi-bin/category.cgi?category=915&type=store good luck

I run a 700watt inverter that I have mounted on an aluminum plate under the hood I used the the same flush mounted female outlets that are used in the inverter and cut the places in the shifter console to mount. These can be a little difficult to find. I used two out of a 300 watt inverter...

When I was in the service and spliced telecom cables we were always told it was a 55Volt ring voltage so it may vary by company or CO. I did not take time to measure it standing in a damp manhole. Not trying to take sides but offer up another view

Here is a pic of my family. My wife Selena, my stepson Bradley, and my daughter Charisma.

Window shopping with Mom... I can make anything, fix just about everything. I never back down from a challenge. I am the kind a person who can fall face first in a pile of crap and come out smelling like roses. However; Painting what I build seems to be my kryptonite. I cannot for the life...

If your mechanically inclined you could use just about any seat that will fit between the center console and the door post. I used a set of honda seats in my 84. I found the ones that recline which was a major improvement over the original ones. I salvaged the bottom frame from the original...

My name is Roger I joined this forum shortly after I bought my ZJ. My first jeep was a cherokee given to me by a coworker. I wasn't planning on keeping it at first but it kinda grew on me. Then my wife wanted a jeep so I bought her a 97 ZJ. She always liked her parents jeeps and was jealous...

RE: Regarding the Site... I am a 8 and it fits pretty good as I work as a foreman. I calculated out my wife and kids and it came out pretty close to there individual characters. Cool thread.

Back to the subject of spares bouncing around in the cargo area. I would not recommend dong it very long I knocked the back window completly of my XJ with a loose spare. Fortunatly it stayed suspended by the defroster wires till I was able to pull over and put it back inside.

Re: Mingez went wheeling today. ***Warning!!! LOTS of pics Mine is bass ackwards the colder the outside temperature the quicker it starts. The remote start will start on the first crank cycle when is cold when it is warm it will start on the second. I would agree with the fuel filter thing...

RE: 85 cj7 4wheel question California used to have a stupid law that made any none California emission equiped vehicle pay a $300 fee for registering them here. Fortunatly they found this to be unconstitional a few years ago. I brought in a pickup from out of state with federal emissions...

Its a front to rear swap with skyjacker 3 inch lift springs in the front no spacer s as of yet. It netted me a even 4 inches all the way around. The tires are Wal-mart liberator 31-10.5 on the factory alum rims. I was crossing a small gully with some railroad tracks directly at the bottom. I...

You know that is a good question :? The haynes refers to the alarm module in the wiring diagrams but does not actually tell where it is. I was poking around another jeep forum and found there is actually two wires under the driver kick panel that are purple with a yellow tracer. According to...

I had my jeep seriously and I mean seriously flexed out. I was a little lazy and I did not even have the front sway disconnected( It was raining ) I did not even know it had rubbed till I came home and was checking for damage and I found some of the undercoat rubbed away from both sides of the...

Just curious if any ZJ's our there rub the back tires on the fender well with 31's with approx 4" of lift. I not to concerned as it is not that bad and I had the my ZJ seroiusly flexed. The 31's are on the stock alum rims and the rear sway bar is still attached. I have never seen a post where...

I have never seen like your looking for grand cherokees. You might consider getting one of those spray on coating for something similar. The thick carpeting and padding of a stock ZJ asorb alot of noise though. Might be little louder inside but turn up the stereo and I am sure you wont...

sorry about the wrong web address. its www.the12volt.com :oops: