Search results

  1. bradleyheathhays

    Blow torch to re-activate clear coat?

    Thanks, I get the picture. What's the sanding and painting process I need to follow? Wet sand using which grit? And what spray product to use for the clear coat? Re-sand and do multiple coats?
  2. bradleyheathhays

    Blow torch to re-activate clear coat?

    96 XJ here. Both my front fenders look like in the pictures (spots are rain drops) and a buddy just was telling me that if you take a blow torch and hold it far away and move it back and forth, then slowly toward the fender that it would 're-activate' the clear coat and make it look new...
  3. bradleyheathhays

    New smoke from the tail pipe

    My main ride is a '96 XJ with 202k miles on her. Very lightly driven her whole life and well maintained. So last night I have this car coming up on me fast so I hit the gas and lo and behold the car's headlights behind me illuminates a cloud of white smoke coming from my tailpipe I've...
  4. bradleyheathhays

    XJ fuel pump going out?

    '96 XJ here, and in all the time I've had this one since 2007 the fuel pump has never been replaced. So unless it was replaced in that first 10 years or so I'm still working with the original one installed. Just twice now in the last week I've noticed a kind of quieter whiney sound...
  5. bradleyheathhays

    Bleeding these '02 Taurus ABS brakes

    After replacing both front flexible brake lines and tightening everything back up I go to start flushing all 4 lines as the fluid is due to be flushed and there are tiny bubbles galore vacuum bleeding at all four brakes. Because I changed out the front lines I bleed those first just to get...
  6. bradleyheathhays

    Bleeding these '02 Taurus ABS brakes

    Just changing out both front flexible brakes lines that go to the calipers on my Mum's '02 Taurus (99k miles) and although I've bled my '96 Cherokee's brakes lines before I haven't done an ABS system and I've been told I need to activate the solenoids in the ABS module while bleeding in...
  7. bradleyheathhays

    Exhaust pipe rattle fix

    So I got a new muffler put on at the local discount Mexicano auto shop (learned my lesson) and they rearranged my exhaust so the pipe forward of the muffler sits about 1/2 inch above the transmission support member and now rattles like a mother. Instead of getting the exhaust redone I'm...
  8. bradleyheathhays

    3 questions...realignment, rear wiper parts and modified headlight harness

    Thanks again JPN. Embarrassed that some more searching could have solved my problem.
  9. bradleyheathhays

    3 questions...realignment, rear wiper parts and modified headlight harness

    '96 XJ here and she's due for some maintenance 1) My steering has been misaligned for a while now pulling fairly hard to the right. What part of my steering is causing this and how to adjust? I won't get this perfect but any improvement would be great 2) How do I find just the headlight...
  10. bradleyheathhays

    Holy cow..main crank shaft pully loose on my 4.0 engine

    Need advice replacing harmonic balancer and front main seal Looks like it's called the harmonic balancer. I've seen where the inner and outer wheel can become disconnected causing my problem so at my mileage I'm gonna go ahead and replace the thing. Just found some videos that make it look...
  11. bradleyheathhays

    Holy cow..main crank shaft pully loose on my 4.0 engine

    The 4.0 inline 6 engine in my '96 Cherokee has 188 k miles on it and (I thought) the serpentine belt or something close by has been squeaking badly for a month now. Tried all kinds of idler pulley tension adjustments and the squeaking continued. I go to start it today and the serp belt jumps...
  12. bradleyheathhays

    Holy cow..main crank shaft pully loose on my 4.0 engine

    Loose harmonic balancer Have a '96 XJ where the harmonic balancer just got off kilter enough that it blew the serp belt off track. I thought it was my serp belt that's been making noise all this time but I guess it's been the balancer. It's come loose and migrated forward some so that the...
  13. bradleyheathhays

    No start on The Old 96er

    Turns out I've got a problem starter. Cleaned both batt terminals and engine ground and got nothing. Tapped the starter a few times and it fired right up. So what kind of starter should I look for? Want something decent with a warranty but not too expensive. Do most people just go for...
  14. bradleyheathhays

    No start on The Old 96er

    Ok good didn't know these car shops could test starters. If I get to the point where I take it off I'll get it to Advanced as I really don't trust the oreileys or zone stores around here. The batt read 12.68 V at the terminals about 5 mins after I turned it off during my errand where it...
  15. bradleyheathhays

    No start on The Old 96er

    Thanks for the very specific numbers. Along with your suggestions I'll check batt ground to engine, and then all connections between batt and starter. After that I'll test the starter by bridging directly from pos batt terminal to starter and see if I can get it to turn.
  16. bradleyheathhays

    No start on The Old 96er

    '96 Cherokee here and right now I'm dealing with a no start after a few weeks of suspicious symptoms. She's been driven a lot less over the past year and about a month ago she began starting a little slow. I've got an oversized battery in there so usually she cranks right up no problem. I...
  17. bradleyheathhays

    Vehicle security

    Unfortunately it looks like I have some people in my new neighborhood paying a little too much attention to my 96 XJ and for the first time I'm feeling a need to add some security system(s) to old yeller. She's stock and still looks great so it's no wonder someone hasn't tried something before...
  18. bradleyheathhays

    Heater duct door switching problem

    I checked all the vac lines on the firewall from the vac source on the driver's side to where it goes into the cabin on the pass side and everything seemed ok. So I get inside and take the glove compartment out and go poking around to see if I can find a loose vac line. Well lo and behold...
  19. bradleyheathhays

    Heater duct door switching problem

    Thanks JPN. Found a video on youtube that describes the problem and fix fairly well. More than likely it's a vac line at the firewall.
  20. bradleyheathhays

    Heater duct door switching problem

    Have an '02 Taurus w/ 103k miles and about 6 months ago all the air, heat or a/c, started blowing only out of the defrost vents at the bottom of the windshield. All the settings work correctly except air has stopped blowing from the floor and dash vents entirely. I know the fix on this is...
Back
Top