Search results

well,you see-some of us aren't teenagers and trying to **** off the neighbors,and only want a little bottom end!furthermore,why put crap in a convertible vehicle that just begs to be stolen?besides,i liked the challenge/discovery adventure and do-it-myself aspect of my solution to the problem!as...

ok,not trying to beat a dead horse here,was a participant in a very similar discussion last week!question:what is the most effective,least expensive option for fitting 32-33" tires?someone told me all you need is a 1" body lift.i have never really been a fan of these,because i hate the visible...

so,if i am to understand these posts clearly,a 1" body lift will allow me to run 33" tires with no trouble?

jfrabat,that is one mean looking YJ!unfortunately,i can't seek out your recommendations,since you have leaf springs!but i would love to get any pros/cons from anybody with a TJ who can answer any questions about lifting 3" or less!i spend 10 times as much time on road as off,and still need...

2wd Jeeps are for mail delivery,or men without balls!

well,word is you can run 31 10.50 15 tires with zero mods,so that's a good place to start!i'm gonna run all the life out of my stock tires before i drop the coin for more tires.just trying to get all the plans laid up for the next level!as far as exhaust,different people like different stuff,but...

i am in the same boat!looking with jealous eyes every time i see a Jeep going down the road sitting up right!then i look at mine,all stock and low!my largest problem is not the wife,it's the fact that i am so overly anal about all the many options that i don't know what road to choose!i want to...

yes,that was done temporarily and it was cold,and i was in a hurry!it will be disassembled and redone as soon as the weather breaks!i am going to do some 4 gauge wiring with power distribution blocks and all soon-i just had to get it going for now!will post some more pics when the final product...

i had a similar problem while installing my windshield hinge light mount brackets.i made the mistake of trying to use a cheap Torx t-40 from autozone.bad idea-cheap tool twisted and deformed the hole.i was able to buy a QUALITY Torx t-40 from snap-on,and carefully beat it in with a hammer and...

i don't either-you might notice i used tractor lights instead of standard KC's-they work well,but are smaller(read that less vision obstruction),and also don't glare so much,but still shoot out some nice light!thinking about building a bridge across the two hood hinge mounts and mounting a total...

p.s.-to adjust the antenna,just carefully grab it with your left hand at the lower base,then just bend it with your right hand!sounds cheesy,but it worked for me!for good measure,i slid vacuum tubing on the lower part so it won't slap around and beat up the light!eventually i will do a cb style...

Here are some pics of mine-i am not 100% on this yet,so don't slam me on tidyness just yet!i am outside working on this in spurts as weather allows,but these pics should help!i took tons of pics,not sure how many can be posted,if you like,e-mail me for more!i placed relays(temporarily)above ecm...

p.s.-i forgot to mention the wires-look at my recent posts,this was covered by some fellow jeepers and me a couple weeks back!i removed the wiper cowling and drilled holes below the screws to pass wires through!it looks nice-will send you some pics on tuesday!

i just did that myself a couple weeks ago!i bent mine slightly to match the angle of the windshield,and it works great!i put a section of vacuum tubing on the bottom half just in case it bounces so it won't beat up my light!it is dark right now-will take pics and post them tomorrow!

thanks for the kudos!i don't have a garage,so i'm waiting on warmer weather to get the wiring done,but with 18 years of experience in my pocket,that is the least of my problems!i am going to do a superb wiring job with 4 gauge wire,and a power distribution block and such,to further accomodate...

i was formerly a car audio installer for 18 years,before i started doing home a/v.my 2003 tj had a blown sub which sounded crappy,so i pulled the console and disassembled it to investigate.the speaker is a dvc with two ohms per coil.having taken chances in the past with such things,i had some mb...

i got a mopar factory hardtop wiring kit,which i installed today.the rear wiper/washer works fine,but i can't tell if the defroster works or not,as the light never lights up.was just wondering if anyone else has ever had this issue,and maybe can shed a little light on it?????

ok,tj jeep-winner,winner,chicken dinner!that's what i was contemplating doing,and it definately looks cool,which is what i was after!i am very anal about such things as that,and for 18 years i did custom car audio,so i know what cool is!i just can't stand something running through the crack of...

i have a 2003 jeep tj,and asked santa for some kc daylighters and windshield hinge mounting brackets.my wishes came true,and now i have them!mounted them today,while freezing my tail off!holding out for better weather for wiring,no problem-i'm a pro at that!my question is-what is the...

many thanks,john!i will do just what you did,and maybe it will turn out better next time!it's nice to find somebody who is willing to share valuable info such as that!