Recent content by moe_emt

Wut type of electrical gremlin u dealing with?

Same boat here...I was told I would need a bracket for pump and possibly a new heim/bell....not the case, whole unit bolted right into my Tj. I also opted to buy a brand new pressure line just to keep from runnin into prob;ems later...... I wish I did this two years ago...Man it was worth...

Well it doesn't show up in the right upper on the mobile app..but thanks

Interested but where are you located? Illinois here.

Yes I am? FF/Paramedic

Well PM me next time ya head out this way.

Marseilles here..

Alright...Got it figured out. My problem was the Ignition switch. That is why it was an intermitten problem. The problem is associated to the cold weather. I give the tumbler a jiggle and my voltage came up to where it should be. New switch, really cold weather and no problems now.

I have a 97 tj w/a 2.5... Intermitten low voltage on dash, alternator checks out fine.. when it shows low voltage (hard to catch) the guage is true to actual voltage tested..All connections are good...Ok, thinking the voltage regulator is in the BCM do I just try a BCM or has anyone ran into any...

When brake pads squeeeeel most of the time it is due to the vibration/loosness between backing of the pad and the caliper which transfers to the pad/rotor surface. After working in shops and dealers, using factory pads and the cheapest pads we never had problems (unless extreme cases)...

Haven't been out here that long for Nabisco to have been still in Operation. Look me up next time your headin out Whitneys and we can hit the Cliffs for an afternoon run...

The gap around the rear wheel wells are what caught my eye. There is no gap to the rear (where there was before) and a big gap in front. Looking at the bolts they seem forward in the mounts. The first thing I did was check the mounts and I took one off to check the condition of the mount, all...

I've got a 97 TJ, no body lift. I just noticed that the tub/body has shifted forward on the frame. The body mounts/bushings are all in tact and look like they're in good condition. I'm not sure if anyones ever had this happen. The question is do I lift the tub and put in new mounts or maybe...