Recent content by hermesgrafix

I just wanted to make a post to see what everyone has in their rigs for the Music. I love my JEEP and Love my music, gotta listen to all that I can to get through the day! I have a 95 and most is stock, I got my System almost done now gonna work on some upgrades. Well here is what I got: Deck...

Update. Well got the new Master Clutch Cyl in today and installed and bleed. This was the problem with the soft clutch. Something popped the day all this happened and I guess that was the problem. Installed the new and pressed on the clutch and had pressure, now drives good again.

No, You can bleed on the Slave there, is a bleeder screw on the top aft area of the Slave with a small hole in the side for the fluid to exit. It is all located on the outside of the bellhousing, so easy to get too.

Well, so far on that issue I spent 55.00 on the slave. Found a company in Arizona that has new ones, and they are a company that deals with clutches mostly, so I an trusting them. The problem is still there I came to the conclusion that the Clutch master is worn out as well. The fluid was almost...

Sorry I did not say the year, it's a 95 wrangler 4.0

Well, wanted to see if anyone has had any issues with not having any pressure on the Clutch pedal. Just replaced My Clutch, Pressure Plate, Throwout Bearing and Slave Cyl. Bleed the line, so I am sure I got all the air out of the system. Having issues with having to push the clutch all the way...

Update. Well today I got home and re-bled the Slave, ran almost a small bottle of the fluid through it, and it helped a little bit. Still have to go to the floor to get the clutch, and still having a problem with reverse. Felt like while driving around the block, some of the gears were tight to...

Lines are not leaking. I will check the MC

OK, kind of lost at this point. Got a 95 Jeep Wrangler 4.0. The clutch went out and so I replaced it. Installed a New Clutch, Pressure plate and throwout bearing. Got everything done and had issues with the clutch pedal. Had to depress the pedal all the way to the floor, and release about an...

Hello, wanted to post this to see if anyone was interested in some Kenwood stuff for your Jeep. Only selling the deck because I got a kenwood Deck from a guy at work that has a little more. The Deck is a Kenwood KDC-MP205 Deck. The deck works good, no issues and everything was working when...

Wanted to see if anyone out there a a new clutch kit for a standard 95 Jeep. One the way to work this morning and loud POP! Clutch went out. So looking to fix. Also want to see if anyone has a poly Transmission mount relpace while there. Also any suggestions on fixing anything while I have...

Trying to install some Mirror relocation brackets on my 95. Having trouble with the hardware. Anyone got any? LMK Thanks Mike

Looking for some parts for my 95 Jeep Wrangler. 1. Drivers Side Visor 2. Passengers Side Mirror 3. Rear LED Tail Lights 4. Set of Seat Covers 5. Clutch Kit for the 4.0 6. Any Upgraded diff covers 7. Any Poly Upgrade for the Jeep, everything is stock except the bump stops. Here is what I have to...

Looking to see if anyone has a set of LED Tail Lights for a 95 Jeep Wrangler. Thanks Mike

Yeah the System sounds good even with the top off. You can still feel the Bass. Need to mount the 6X9s so someone dosent swipe them!